 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Anyone
undertaking this project does so at there own risk.
I take no responsibility for any damage to equipment or
personal injuries resulting from attempting this project.
What follows are instructions on how to get a Sega Dreamcast up and running in an arcade cabinet.
What you need
1 x JAMMA Arcade Cabinet
1 x JAMMA Fingerboard
1 x Sega Dreamcast
1 x Audio amp. (capable of being run off 12v DC)
1x RGB Scart Cable
Just the standard RGB cable, you're going to break this open
- so I recommend you buy one specifically for this project
and keep the one you (probably) got with the Dreamcast
2 x Offical Sega Dreamcast Controllers
You need the standard DC controllers
What's
Involved
It's a very simple procedure to get a Dreamcast into an arcade cabinet
cabinet, but it does require some soldering skills.
The only extra bit of electronics required is an audio amp,
which you could buy rather than build using the instructions described here
